Roof mounted installations
Mounting systems or similar roof constructions that are incorrectly installed can cause unwanted damage to the fragile roof covering. This can cause problems with moisture inside the roof cavity or the building itself. To avoid this situation, our frames are mounted on a highly resistant protective covering. The triangular constructions can be pre-assembled on the ground and simply placed on the covering at optimal spacing.
The beams are connected with special brackets. The longitudinal beams and the wind bracings on the back of the frame provide the required stability. Finally, the modules are mounted directly on the longitudinal beams with the approved clamps. The mounting points on the beam are either pre-drilled or can be freely selected. The choice of mounting always depends on the existing roof structure: Mounting on membrane roofs is done with additional ballast. Tin roofs require the appropriate clamps.